Graph Lines Tab: Difference between revisions

From BurnSim Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 50: Line 50:
rect 1276 131 1337 154 [[Startup Tab|Options for startup transients.  Not currently implemented]]
rect 1276 131 1337 154 [[Startup Tab|Options for startup transients.  Not currently implemented]]
rect 1418 167 1504 203 [[Area Button|Not yet implemented]]
rect 1418 167 1504 203 [[Area Button|Not yet implemented]]
rect 1054 614 1145 641 [[Sim Results Tab|Enter here to view simulation results summary]]
rect 1054 614 1145 641 [[Main_Page|Enter here to view simulation results summary]]
rect 1157 613 1251 637 [[Graph Lines Tab|Enter here to modify colors and turn graph lines on/off]]
rect 1157 613 1251 637 [[Graph Lines Tab|Enter here to modify colors and turn graph lines on/off]]
rect 1266 614 1343 640 [[Test Data Tab|Enter here to import test data and view previously imported test data]]
rect 1266 614 1343 640 [[Test Data Tab|Enter here to import test data and view previously imported test data]]
Line 59: Line 59:
rect 1064 778 1323 805 [[Imported Thrust  Graph Line|]]
rect 1064 778 1323 805 [[Imported Thrust  Graph Line|]]
rect 1064 812 1320 845 [[Mass Flux Graph Line|]]
rect 1064 812 1320 845 [[Mass Flux Graph Line|]]
rect 1063 844 1320 882 [[Mass Flow Graph Line|]]rect 44 951 286 982 [[X Axis Start|Specify start value for X axis, useful for zooming in on specific parts of the burn]]
rect 1063 844 1320 882 [[Mass Flow Graph Line|]]
rect 44 951 286 982 [[X Axis Start|Specify start value for X axis, useful for zooming in on specific parts of the burn]]
rect 320 954 562 980 [[X Axis End|Specify end value for X axis, useful for zooming in on specific parts of the burn]]
rect 320 954 562 980 [[X Axis End|Specify end value for X axis, useful for zooming in on specific parts of the burn]]
rect 648 947 954 987 [[End Sim Percentage|For motors with a long tail-off, can specify a % of max thrust to designate motor burnout and end the simulation]]
rect 648 947 954 987 [[End Sim Percentage|For motors with a long tail-off, can specify a % of max thrust to designate motor burnout and end the simulation]]

Latest revision as of 17:00, 16 November 2022

Hover over or click on various fields in the image below to get more details on each field.

BurnSim Main WindowName of the propellantCommon propellant properties, including characterization numbersHere you can specify propellant properties based on chamber pressure. For some propellants, properties change with chamber pressurePropellant NotesC* or Characteristic Exhaust Velocity. This can be calculated in ProPepCharacteristic ISP is simply another representation of C*, aboveBurn Rate Coefficient (A)Burn Rate Coefficient (N)Propellant Density, measured or theoretical from ProPepSpecific Heat Ratio is currently not required, will be used for Startup Transient Simulation in the futureMolar Mass is currently not required, will be used for Startup Transient Simulation in the futureClick this button to add a new propellantClick this button to edit selected propellantClick this button to delete the selected propellantFile MenuAction MenuSettings MenuView MenuHelp MenuGrain Type for specified/highlighted grainsPropellant for specified grain selected from propellant databaseGrain LengthGrain DiameterGrain Core DiameterCore Offset, Fin Thickness, etc - this field will change depending on the type of grain selectedNumber Of Points when a star grain is selected - this field will change depending on the type of grain selected Number Of Points when a star grain is selected - this field will change depending on the type of grain selectedFin Length for finocyl grains - this field will change depending on the type of grain selectedInhibited Ends - select the number of inhibited ends for the grain(s). Can be 0-2.Add Grain - this button adds a grain with the specified propertiesDelete Grain - this button will delete any grains selected in the gridUpdate Grain - this button will update any grains selected in the grid with the properties specified.Grain Up - moves the grain up in the motorGrain Down - moves the grain down in the motorDisplayes motor grains and propertiesImage of the selected grain cross sectionFuture feature where a longitudinal cross section of the motor will be displayedOpen a BSX FileStart a new motor simulationSave current motor diskExport current motor to ENG file for use in flight simulatorsExport current motor data to CSV for consumption in other applicationsRun simulationEnter this tab for nozzle propertiesEnter this tab for editing propellantsOptions for startup transients. Not currently implementedNot yet implementedEnter here to view simulation results summaryEnter here to modify colors and turn graph lines on/offEnter here to import test data and view previously imported test dataSpecify start value for X axis, useful for zooming in on specific parts of the burnSpecify end value for X axis, useful for zooming in on specific parts of the burnFor motors with a long tail-off, can specify a % of max thrust to designate motor burnout and end the simulationSimulation Results are displayed hereEnter here to view simulation graphNotes tab for recording notes on a motor. Will be saved with the motor.
About this image
Retrieved from "https://wiki.burnsim.com/index.php?title=Graph_Lines_Tab&oldid=92"